Dremel 3D Printer - 3D20 with RFID Filament Spool

Dremel

3D20 3D Printer

with RFID Filament Spool

USED / TESTED

ACRYLIC PRINT BED

INCLUDES US POWER CORD

EXTRUDER DISASSEMBLED & CLEANED

MINIMAL COSMETIC WEAR FROM TYPICAL USE

Dremel 3D20

The Dremel 3D20 is a 3D printer that is designed for hobbyists, tinkerers, and other users new to 3D printing. It has a fully enclosed workspace that stabilizes the temperature and reduces noise. It has a maximum build volume of 9” x 5.9” x 5.5” (230mm x 150mm x 140mm) and a layer thickness of 4 mil (0.004 inches, 100 microns, 0.10 mm). It has a 3.5” full color IPS touch screen and an extruder temperature of up to 230°C (397°F). It can only build .g3drem files and can use Dremel Digilab 3D Slicer or Simplify3D to create these files

Features:

   -  Advanced motion control minimizes noise

   -  Removable build platform for easy object removal

   -  On-board software enables stand-alone operation

   -  Full color touch screen lets you go from file to building effortlessly

   -  Seamless 3D printing with SD card

   -  Fully enclosed for protected building

   -  100 micron build resolution for high quality building

Additional Info:   

  https://www.dremel.com/binaries/content/assets/dremel/us/digilab/3d20-documentation/quick-start-guide-3d20.pdf

  https://media.digikey.com/pdf/Data%20Sheets/Dremel%20PDFs/3D_Product_Info_Specs.pdf

* Please note that 3D printers, whether new or used, require tuning and calibration to print properly. They typically do not produce ideal prints 'out of the box' until the operator adjusts settings and hardware for the printer, slicing software, 3D model, and specific filament type.

* Includes only what is shown in pictures