Zebra
Zebra 105SL+ Plus TT/DT Label Printer 102-801-00000 GOOD PRINTHEAD
Zebra 105SL+ Plus TT/DT Label Printer 102-801-00000 GOOD PRINTHEAD
Zebra
105SL Plus
PN# 102-801-00000
USED
GOOD PRINTHEAD
VERY GOOD CONDITION
INCLUDES AC POWER CORD
MINOR COSMETIC WEAR FROM TYPICAL USE
Zebra 105SL Plus 102-801-00000
Physical Features
Full-function front panel and large multilingual back-lit LCD display - with user-programmable password protection
Thin film printhead - with E3 Element Energy Control
8 MB Flash memory - including 2.0 MB user-available non-volatile memory storage for downloadable objects
Serial RS-232 and bi-directional parallel ports - with auto detect USB 2.0 port
Dual media sensors - transmissive and reflective, selectable through software or front panel
Internal ZebraNet 10/100 Print Server - supports 10Base-T, 100Base-TX, and fast Ethernet 10/100 auto-switching networks.
Firmware
ZPL or ZPL II programming language- selectable through software or front panel
XML Enabled Printing - allows XML communications for barcode label printing, eliminating license fees and printer server hardware and lowering customization and programming costs
Printer Operation
32 bit 133 MHz RISC processor
16 MB SDRAM memory (12 MB user-available )
Internal real-time clock
Advanced label/media counters
Thermal transfer and Direct thermal printing of bar codes, text, and graphics
Auto calibration - printer calibrates when printer is turned on or when printhead is closed using approximately two labels
Zebra Universal Printer Driver - for Microsoft Windows 2000/XP/Vista operating systems
Media type: continuous, die-cut, or black mark, notch.
Minimum label length:
Rewind mode: 0.25 in. (6 mm)
Peel mode: 0.5 in. (13 mm)
Tear-off mode: 0.7 in. (18 mm)
Cutter mode: 1.5 in. (38 mm)
Media thickness (label and liner):
0.003 in. (0.076 mm) to 0.012 in. (0.305 mm), 0.009 in max in cutter mode
Maximum media roll size:
8.0 in. (203 mm) outside diameter on a 3 in. (76 mm) inside diameter core
Transmissive (gap) sensing standards:
Interlabel gap: 2 - 4 mm, preferably 3 mm
Sensing notch: 0.25 in. W (6 mm) x 0.12 in. L (3 mm)
Sensing hole: 0.125 in. (3 mm) diameter
Reflective (black mark) sensing standards:
Media width (label and liner): 0.79 in. (20 mm) to 4.5 in. (114 mm)
Maximum full-width media thickness for cutter: 0.23 mm (0.009 in.)
Additional Info:
https://support.zebra.com/cpws/docs/105slplus/105slplus_specs.htm
* Includes only what is shown in pictures
* If applicable, the current registration, calibration, licensing, software, programming, or preventative maintenance has probably expired on this unit by now. Buyer may need to reset or register this device, purchase licensing and/or software prior to configuration & usage
* Please note that items are NOT included unless listed in writing or pictured such as: passwords, reset, device registration, programming, Unlock/Access/Key codes, software, drivers, speed controllers, power supplies, manuals, cords, etc.
Physical Features
Full-function front panel and large multilingual back-lit LCD display - with user-programmable password protection
Thin film printhead - with E3 Element Energy Control
8 MB Flash memory - including 2.0 MB user-available non-volatile memory storage for downloadable objects
Serial RS-232 and bi-directional parallel ports - with auto detect USB 2.0 port
Dual media sensors - transmissive and reflective, selectable through software or front panel
Internal ZebraNet 10/100 Print Server - supports 10Base-T, 100Base-TX, and fast Ethernet 10/100 auto-switching networks.
Firmware
ZPL or ZPL II programming language- selectable through software or front panel
XML Enabled Printing - allows XML communications for barcode label printing, eliminating license fees and printer server hardware and lowering customization and programming costs
Printer Operation
32 bit 133 MHz RISC processor
16 MB SDRAM memory (12 MB user-available )
Internal real-time clock
Advanced label/media counters
Thermal transfer and Direct thermal printing of bar codes, text, and graphics
Auto calibration - printer calibrates when printer is turned on or when printhead is closed using approximately two labels
Zebra Universal Printer Driver - for Microsoft Windows 2000/XP/Vista operating systems
Media type: continuous, die-cut, or black mark, notch.
Minimum label length:
Rewind mode: 0.25 in. (6 mm)Peel mode: 0.5 in. (13 mm)
Tear-off mode: 0.7 in. (18 mm)
Cutter mode: 1.5 in. (38 mm)Media thickness (label and liner):
0.003 in. (0.076 mm) to 0.012 in. (0.305 mm), 0.009 in max in cutter modeMaximum media roll size:
8.0 in. (203 mm) outside diameter on a 3 in. (76 mm) inside diameter coreTransmissive (gap) sensing standards:
Interlabel gap: 2 - 4 mm, preferably 3 mm
Sensing notch: 0.25 in. W (6 mm) x 0.12 in. L (3 mm)
Sensing hole: 0.125 in. (3 mm) diameterReflective (black mark) sensing standards:
Media width (label and liner): 0.79 in. (20 mm) to 4.5 in. (114 mm)
Maximum full-width media thickness for cutter: 0.23 mm (0.009 in.)
Additional Info:
Share











